[Elecraft] K3 and Steppir antenna

[Mike]

  Rich,

If you connect a cable from the K3 to the SteppIR controller, it will follow the 
radio. The simple way is to order the cable from SteppIR. It will have a computer 
connector on it, but it doesn't have to be attached to your computer. There is also a 
schematic on the SteppIP site if you want to build one your self.

73, Mike NF4L

On 9/23/2010 7:51 PM, Richard Haendel wrote:
> I have a K3 and would like to control the Steppir band and frequency segment selection via the Steppir data port.
> I am confused as to what is needed. I do not have a computer attached to the K3 nor the Steppir.  Any advice as to what to do?
>
> Thanks
>
> Rich W3ACO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>