[Elecraft] [K3]Computer interface & SteppIR

[Mike]

  Just reloaded 4.05 and no help.

On 9/22/2010 10:20 AM, Mike wrote:
>    Something has recently gone sour in my station, and I'm not sure where the problem
> lies.
>
> I have a SteppIR controller hooked to the K3 with the "Wye" cable SteppIR provides.
>
> Turning on the controller causes the K3 to toggle to xmit 6 times.
> When the SteppIR controller is on, changing frequency on the K3 causes the program
> (N1MM, Dx4Win, DxDevil) to freeze and the rig to stop responding.
>
> I've tried AUTOINF:nor and Auto 1.
>
> Is there any setting in the K3 that would upset what was a working station? Maybe
> something in the latest firmware to accommodate the P3?
> The K3 utility seems to communicate OK, altho I haven't actually tried a load.
>
> Win XP SP3.
>
> 73, Mike NF4L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>