[Elecraft] K3 "beginners config setting"?

[Sam Morgan]

OK then how about a tutorial
explaining what each setting does
if you went this way or that way from the defaults
and how that changes related to the different modes?

something like an expanded version of:

"AGC PLS = NOR.
I used this on, Seems to help with fast static crashes... Kind of."

or this

"AGC DCY = NOR.
I use this in NOR Most of the time.  However, when there's lots of stations in a 
pile up I tend to turn it on to Soft with the AGC set to SLOW.  It helps 
separate the stations from one another."

above were partial quotes from one of the list members.......

it would be great to have all this info posted here, and then perhaps someone(s) 
could get it up on a web site, that wouldn't disappear shortly afterwards.

--
GB & 73
K5OAI
Sam Morgan

On 9/18/2010 4:21 PM, Hank Garretson wrote:
> On Sat, Sep 18, 2010 at 2:18 PM, ussv dharma<ussvdharma at yahoo.com>  wrote:
>
> Perhaps, since the K3 IS so versitle, there should be a setting for
>> "beginners".  Using this setting sets everything to a reasonable setting for
>> us that dont understand all the K3 settings.  I dont mean a reset, but one
>> for beginners.
>>
>
> The Elecraft K3 default settings!?!?
>
>
> 73,
>
> Hank, W6SX
>
> Mammoth Lakes, California
>
> Elevation 8083 feet in John Muir's Range of Light
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>