[Elecraft] [p3] Trap Conflict on FW 0.36

[Larry - K2GN]

I've reloaded all Firmware back to
K3 - 4.05
P3 - 0.32
I'm still getting the Trap Conflict message on power on, then the P3 goes
into normal operation, but I have to remove power from 12V source to shut it
off.

de K2GN - Larry - http://k2gn.com
K3 S/N - 3278    P3 S/N - 51



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Larry - K2GN
Sent: Friday, September 17, 2010 6:57 PM
To: Elecraft - K3
Subject: [Elecraft] [p3] Trap Conflict on FW 0.36

Power ON/Off - Trap Conflict

After it's  on for a while and I power off, it gave me:

Trap Conflict, then start working.

I have to remove power to shut it down.

 

 

Once I was able to power down using the switch and it gave me:

Download Firmware
Ready for Download

And sits.  I can then turn power via the switch. 

 

I did the download and upload twice.

K3 has FW 4.12, this upload went well.

Anyone else with this problem?

 

de K2GN - Larry <mailto:k2gn at k2gn.com>  - http://k2gn.com <http://k2gn.com/>


K3 S/N - 3278    P3 S/N - 51

 

 


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.851 / Virus Database: 271.1.1/3139 - Release Date: 09/17/10
14:34:00