[Elecraft] K3 :: hardware AGC mod kit

[Steve Jackson]

I have my K3 on the bench, doing a series of updates and whatnot= ... since
I just got and assembled the P3 I figured the setup is disconnected anyway,
so, this is a good time.

The K3 is serial # 1209.

Looking at the hardware AGC mod instructions, I see that my radio does not
have an R101 to replace with an LED, but already HAS an LED at that
location.
The silkscreened reference designator (D40?) is for a diode.

R40 and R33 are already low-value ( a few ohms) resistance parts.

R41 and R42 are already 33k parts.

So... can I assume that this mod isn't necessary on my rig?

Steve KZ1X/4

K1, K2, K3, etc.