[Elecraft] [K3] Low and High Mic gain question

[Dr. Werner Furlan]

Bill, 

Bill Conkling schrieb am 15 Sep 2010 um 21:29:

> I think what is needed here are two PF keys, one to set the mic up for
> FrontPanel, and one for the RearPanel.  Each would make the necessare gain,
> compression, range, bias and equalization settings for the respective mics.
> Perhaps someone familiar with the K3 programming could create this and pass
> it on as a tutorial, or script or whatever for newbies like myself

I have created two macros for my microphones, Heil headset rear, Icom SM-8 
front. 
The macro for the Heil is: 
MN053;DN;DN;UP;SWT11;MN255;MG030;
The macro for the Icom is:
MN053;DN;DN;SWT11;MN255;MG023;

The problem is that the High / Low setting is toggled and not saved 
seperately for the front and rear microphone. 
I see two possibilities for the developer to solve it:
either keep it seperately for front / rear or create a dedicated code for 
low and high microphone level.
I have also asked for this feature and Wayne's comment was positive. I 
don't know where it is on the list. 

73! de Werner OE9FWV

-- 
 Das Problem mit den alten Leuten wird nicht weniger obwohl so viele
 sterben. Aber es wachsen immer neue nach.


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone +43 5522 75013
Fax +43 5522 22505
Mobile +43 664 6340014
Fax-Email Gateway +43 820 220262990