[Elecraft] P3 cursors won't go up more then 200 MHz

[Wolf E. Rose]

hi Jim,

sorry I've been not clear enough to explain my problem.

It is the CENTER frequency I'm talking about not the SPAN.

For example: receiving frequency is at 432.418 MHz (German beacon) and  
P3 has been switched on together with K3. P3 displays the same center  
frequency as the K3 dial shows. Now you tap 'Marker A' an switch it  
on. Displayed on P3's screen is 'Marker A 432418'. As soon as you dial  
the P3 select the P3's display shows 'Marker A 200000'. You only can  
now dial to a frequency BELOW 200000, there's no chance dialing mor  
than 200000.

If you now try qsying via P3 selct (tap to QSY) the K3 won't follow.  
It is fixed to K3's frequency.

Sorry about being not clear enough, but my English is too poor to make  
the explanation clearer. Hope you understand my problem anyway ;-).

Thanks for answering es 73
Wolf DK1IP


Am 16.09.2010 um 14:21:01 schrieb Jim Cox:

> The span of the P3 is 200 khz.  You state 200 mhz so not sure if  
> span is what your questioning.
>
> Jim K4JAF
>
>
> ----- Original Message ----- From: "Wolf E. Rose" <wolf.e.rose at freenet.de 
> >
> To: <elecraft at mailman.qth.net>
> Sent: Thursday, September 16, 2010 12:47 AM
> Subject: [Elecraft] P3 cursors won't go up more then 200 MHz
>
>
>> hi folks,
>>
>> just preparing everything for the IARU-region 1 UHF/SHF-contest
>> (10/2-3).
>>
>> While testing I was not able to set the P3's cursors beyond 200 MHz.
>> Anybody show me the right way to exceed this frequency limit please.
>> I'm sure this must be a software bug between operator's ears.
>> Everything else (K3/10 #1935, Kuhne TR432H transverter) working
>> together fine since years. Only the brandnew P3 #323 won't
>> follow ... ;-(
>>
>> 73
>> Wolf DK1IP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>