[Elecraft] K3 - CONFIG question

[Tommy Alderman]

Val -- That is good information, but why 38400/N/8/2 ? My manual says the
stop-bits should be set to '1' ? Is your keying working with N1MM the way
you have it?

73,
Tom - W4BQF


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Val
Sent: Thursday, September 16, 2010 5:15 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 - CONFIG question

Poul-Erik,

I have here K3 PTT-KEY as OFF-DTR and N1MM as 38400, N,8,2, DTR-CW, 
RTS-Always Off.

73 Val LZ1VB


>What are the correct settings of the K3 and of N1MM for keying (CW) the K3 
>from N1MM?
>Sorry if this has been answered in the past - if so pse just a link.
>Poul-Erik, OZ4UN


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html