[Elecraft] K2 + K160RX

[Don Wilhelm]

  Geo,

It is likely something that "just happened" and is unrelated to the 
K160RX installation.
However, is there any way that you can describe "distorted".  I can 
think of many ways that a CW note would sound distorted, but a bit more 
information might be helpful to narrow the field of candidates.

If it a a "warbling" type of distortion, check RFC15 on the bottom of 
the RF board for continuity (use the ohmmeter, it will measure 5 volts 
on both sides even if open).

73,
Don W3FPR

On 9/15/2010 5:42 PM, W2bpi1 at aol.com wrote:
> Built and installed the 160 kit in my K2 (6911) today. After alignment it
> works good on all bands transmitting on CW. But on all bands receiving cw
> the cw  tone is distorted! What could I have done? I removed the K160RX and cw
> sigs  still distorted.   Geo/W2BPI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>