[Elecraft] KRX3 band pass filters needed?

[Vic K2VCO]

I missed the original message, but if the dipole is coax fed, a balun at the feedpoint 
will go a long way to reducing pickup from the vertical. Might even solve the problem 
entirely.

On 9/15/2010 3:28 AM, VE3WDM wrote:
>
> Good Morning Don, The Dipole is in a two story townhouse and it is 90 degrees
> in orientation to the vertical antenna. I would say the separation between
> the two is about 40 to 50 feet. The vertical antenna is a High Sierra
> sidekick located at ground level. I use it for CW at 50 to 100 watts.  I was
> talking to Gary at Elecraft and he suggested others have used model 197 or
> 197  RF Limiter / receiver protect by Iceproducts. I will look into that too
> and this COR relay is it a very noticeable clicking if it was to be
> activated?
> Mike
> VE3WDM


-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/