[Elecraft] LP Pan versus P3 Panadapters

[Larry K1UO]

Hi Alan,

  Ill admit I didnt try a narrower span and I normally use the +-15Khz
setting  (30Khz span) on the 160 meter cw band.  Ill try narrowing it up and
see if it picks up the very weak signals but I dont want to operate on a too
narrow span or, as they say, it becomes much less useful to me.     

73 Larry 



"However the carrier is clearly visible on the waterfall if I set the P3 
span to 2 kHz.  As I increase the span the signal gradually gets harder 
and harder to see.  Above about 30 kHz or so the signal disappears into 
the noise. 

So that's the trick.  Narrow the span to make those signals pop out of 
the noise. "

73, 

Alan N1AL 



-- 
View this message in context: http://elecraft.365791.n2.nabble.com/LP-Pan-versus-P3-Panadapters-tp5528469p5532080.html
Sent from the Elecraft mailing list archive at Nabble.com.