[Elecraft] Settings for CM500 on K3?

[D. R. Evans]

Don Wilhelm said the following at 09/13/2010 07:57 PM :

> First turn the compression to zero, then increase the mic gain until you 
> see 6 to 7 bars on the ALC meter.
> Than add compression as you like.
> 
> You can do all that in TEST mode.  When adding compression, you can 
> listen to yourself on the monitor.
> 
> Try it and see what happens - I suspect you are not hitting the ALC hard 
> enough.
> 

That is exactly what I did, since that's what the manual says to do.
Everything looks and sounds fine on the K3 itself. It's when I look at the
external PEP meter that the problem becomes obvious.

  Doc  N7DR

-- 
Web:  http://www.sff.net/people/N7DR