[Elecraft] BND end message

[Matt Zilmer]

Hi Dave,

The K3's IF is at 8.3 MHz.  There is a lockout in the spectrum around
this frequency.  I think it's from 7.5 to 9 MHz, but not positive. You
can RX anywhere, but TX is disabled for the range near 8.3 MHz.

If you contact k3support at elecraft.com, I think Brian can get you a
copy of the latest software.  You will have to show a copy of your
MARS credentials.  The Membership Card is probably good enough for
this.

73,
matt W6NIA / NNN0UET

==

On Mon, 13 Sep 2010 14:27:51 -0500, you wrote:

>  Folks,
>
>I recently received the "BND end" message while trying to operate (MARS) 
>around 7.5 MHz. +/- a bit.
>
>I have used the elecraft software to "open up" the allowed transmission 
>range; I do seem to remember there were still some areas to avoid; is 
>this one of them, and if so, could I get reminded of what all they are?
>
>Is there a more recent update to that software?  I lost mine in a recent 
>computer crash...
>
>Thanks and 73 de Dave, W5SV / NNN0SLA
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html