[Elecraft] two 2m-Transverters for diversity reception on 2m

[nr4c at widomaker.com]

Where is the 4.1 beta?  I have looked for it and onbly founbd the 4.05  
which i already hve on my K3.

...bc


Quoting David Pratt <david at g4dmp.fsnet.co.uk>:

> Joe - It might be useful to upgrade to the latest K3 v4.10 beta
> software. It provides some changes to the way the transverters are
> addressed.....
>
> * K144XV BAND-DATA OUTPUT ADDRESS RANGE INCREASED:
> Originally, CONFIG:XVn ADR was always set to "INT TRN1" to enable
> the K144XV. This set all band data outputs on the ACC jack to 0. Now,
> XVn ADR has of "INT TRN0" to "INT TRN9" for the K144XV. Band-data
> outputs are set accordingly. This may be useful when the K144XV is
> used as an IF for higher-band external transverters. (If you have a
> K144XV, the original INT TRN1 will now be INT TRN0 in the menu.
> This is the new recommended setting if you're not using external
> transverters in conjunction with the K144XV.)
>
>
> 73 de David G4DMP
>
> In a recent message, DF1AL <gosun at web.de> wrote ...
>
>> How can I tell the K3 which of two 2m-transverters (XV1: K144XV-internal and
>> XV2: external transverter connected through KXV3A RX-ant IN) to address?
>> When I enable both transverters in CONFIG (XV1 ON = YES and XV2 ON = YES)
>> the K3 will always adress XV2 and does not leave me a chance to choose which
>> transverter to use with either RX input. This would be useful for diversity
>> reception with XV1 connected to the MAIN rx and XV2 conntected to the SUB
>> rx.
>> Has anybody succeeded to use two separate 2m Transverters with both RX paths
>> for diversity reception - and how?
>
> --
> David G4DMP
> Leeds, England, UK
> ------
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>