[Elecraft] P3 Misbehaving?

[Al Lorona]

Alan's advice is pertinent because I found my P3's BNC-to-BNC coax cable to be 
open... swapping it with a known good one laying in my cable drawer solved that 
problem. Just a warning for anybody else to go ahead and suspect the cable (as 
well as everything else) if you don't see what you expect to see on the P3.

Al  W6LX
 
________________________________________________________
OM,

First check the coax cable to be sure it is properly seated at both the
K3 and P3 end.  If you have another BNC coax cable available you might
try it to see if the problem is a bad cable.

Alan N1AL