[Elecraft] K3 DX4Win

[Dave Perry N4QS]

Ken,

I use DX4WIN with my K3 and I notice the same issue.  I do not use PSK31 
very often and when I do I have the change the mode manually within DX4WIN. 
This is more than likely a DX4WIN issue with the rig control file for the 
K3.  The software is probably not recognizing the Data A or Data D modes on 
the K3 and by default assigns RTTY.  N1MM contest software provides a way to 
map the modes in the Configurator.  I would think some modification of the 
rig control file for the K3 is needed in DX4WIN.  I would refer this to the 
DX4WIN reflector.

Dave, N4QS

----- Original Message ----- 
From: "ken chandler" <g0orh at sky.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, September 11, 2010 4:37 AM
Subject: [Elecraft] K3 DX4Win


> Hi Gang
>
> Anyone using DX4Win with the K3, The MODE in DX4win will not recognize 
> PSK31
> on k3 and is defaulting to RTTY mode.
>
> IN DATA MD I am using PSK D.
>
> I have tried changing settings in DATA MD ie data A, on the k3 but no
> change.
>
> In DX4Win I have the mode box ticked for PSK31 RTTY.
>
> I have also un-checked RTTY in dx4win but it still defaults to 
> RTTY...weird
> !
>
>
>
> Thanks
>
>
>
> Ken..G0ORH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>