[Elecraft] K3 RFI in transmitted audio

[Felipe Ceglia]

Hi Jim

Here is the setup:

rig A:
K3
heil proset on front panel
pc audio on rear plugs
cat plugged via microham microkeyer
nothing plugged on cw key jack (that minimized rfi a bit, it was
coming from microkeyer)
JRC 1kw amp

rig B
ft2000
cat cable to pc
icom pw1 amp

The antennas are all near the shack.

When rig B TX, depending on band, it gets into K3 TX audio.


2010/9/11 Jim Brown <jim at audiosystemsgroup.com>:
> On Fri, 10 Sep 2010 21:35:49 -0300, Felipe Ceglia wrote:
>
>>When second rig is TX on 80m, I get the whole audio being coupled by the K3.
>
> Please give more detail about your problem. Are both radios transmitting at
> the same time? Both K3s, or one a different radio? Is there a computer
> feeding either radio?  Where do you hear the RFI?  Where do the radios get
> their DC power?  Exactly. What kind of power supply? Is the V- terminal
> bonded to the chassis at the power supply?
>
>>Is this a common issue?
>
> It depends on the details of your problem.
>
>>Any tips to solve?
>
> It depends on the details of your problem. :)  Once we hear more details, we
> can give some ideas.
>
> 73, Jim K9YC
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Felipe Ceglia - PY1NB
-------------------------------------------------------------------------------------
PR1T team member /// Rio DX Group member /// Araucaria DX Group member
http://www.dxwatch.com /// http://reversebeacon.net ///
http://riodxgroup.dxwatch.com