[Elecraft] P3 Improvement Suggestion

[Jim Miller KG0KP]

I find I have done this (initially at least until I figure out how I am 
really supposed to do it) by setting the display to show the noise floor at 
the bottom of the window and then only 20 or 30 db above it, not all the way 
up to -70 or so.  Yes the stronger signals go off the top but I don't care 
about their height anyway when looking for those smaller ones.  That helps 
the weak ones stand out.  Just learning of course.

73, de Jim KG0KP

----- Original Message ----- 
From: "S Sacco" <nn4x.steve at gmail.com>
To: "Guy Olinger K2AV" <olinger at bellsouth.net>
Cc: "Elecraft Reflector" <Elecraft at mailman.qth.net>
Sent: Monday, September 06, 2010 5:39 PM
Subject: Re: [Elecraft] P3 Improvement Suggestion


Guy -

I'm not sure what you would call it, but the purpose would be to
provide more screen real-estate for the small signals, at the expense
of the large signals.  This would be very valuable on a small display,
such as the P3.  On a larger display, it would have little value.

73,
Steve
NN4X