[Elecraft] K3 Internal Keyer vs. Straight Key
KE8G
KE8G at cox.net
Mon Sep 6 08:04:53 EDT 2010
All,
Thanks for the information!
This is what I was hoping for; to be able to have both plugged in and choose
between which to use.
Thanks again,
Jim - KE8G
73
----- Original Message -----
From: "Bill Conkling" <nr4c at widomaker.com>
To: <Elecraft at mailman.qth.net>
Sent: Sunday, September 05, 2010 11:37 PM
Subject: Re: [Elecraft] K3 Internal Keyer vs. Straight Key
> NO need to turn off the internal keyer. I made my own serial cable to key
> my K3 from the computer via N3FHJP as well as other programs, plugged into
> the "Key" jack. Keep the Bencher plugged into the "Paddles" jack as well.
>
> The cable is real simple, uses a 2n2222 transistor and a 1.2K resistor in
> the base. Works well.
>
> ...bc
>
> -----Original Message-----
> From: KE8G [mailto:KE8G at cox.net]
> Sent: Sunday, September 05, 2010 8:32 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Internal Keyer vs. Straight Key
>
> Dumb question here!
>
> I have a K3/100 #4401 and I am using N3FJP software. I just purchased the
> Serial to Straight key cable. The setup instructions says the internal
> keyer
> must be turned off. I see nothing in the manual on how to do that.
>
> Also, on the rear panel there is an input for paddles and one marked key.
> I
> believe that is for a straight key/PC, etc.
>
> How do I turn off the internal keyer?
> Or, can I keep the paddles connected (use when desired), plug the cable in
> the "key" input and use the software & PC? Have both connected at the
> same
> time?
>
> Thanks in advance,
> Jim - KE8G
> 73
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list