[Elecraft] Z10000 installatoin in K2

[Don Wilhelm]

  Jerry,

You could use most any connector, RCA jack, BNC, SMA, SO-239.  The rear 
panel space is a bit tight if you have both the K60XV and the K160RX, so 
just use whatever fits.  I personally would not want to use the Receive 
ANT jack, but you certainly can if that is your choice.

73,
Don W3FPR

On 9/4/2010 6:20 PM, n0jrn at mchsi.com wrote:
>
> Gang:    Just curious if one really needs to use the SMA connector provided
>       for installation in the K2???
>
>       Given the location indicated for installation of the board,  I can't imagine
>       picking up any stray signals is a concern.
>
>       Since I never use the BNC connector for my 160 meter board,  figured I would
>       use it rather than drilling more holes in the back panel.
>
>       I wanted to make sure I wasn't missing something so thought I would see what
>       the pro's think before proceeding.
>
>    Thanks and have a great weekend:
>
>       Jerry   N0JRN
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>