[Elecraft] P3 Com Port Issues

[Terry Schieler]

Perfect.  You nailed it Craig!  The logging software had been reset to 2.4.
I had rechecked the Com Port setting but didn't look at the data rate. I
changed it to 38.4 and all is well again.  Thanks very much.

73,

Terry, W0FM

-----Original Message-----
From: Craig D. Smith [mailto:craig at powersmith.net] 
Sent: Saturday, September 04, 2010 4:38 PM
To: 'Terry Schieler'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] P3 Com Port Issues

One quick thing to check Terry is the data rate on both the K3/P3 and your
logging program.  They must be the same, and installation of the P3 may have
changed one of them.

73  Craig  AC0DS