[Elecraft] Microham MKII

[Joe Subich, W4TV]

 > What has changed?

No changes. K3 (patched) option has been available for two+
years.  It is designed to recover more rapidly when a logger
continues to poll while the K3 is turned off or nor responding
(Router's buffers are flushed rather than allowed to overflow).

 > When I got home I noticed a new setting of K3 (patched) and it
 > appears to work at 4800bps but not above that level.  I guess
 > something has changed.

When you reset the data rate in Router, did you also reset it in
your logging software and in the K3 (CONFIG:RS-232)?  Neither
most logging software nor the K3 have "auto buad" options (nor
is autobaud a good idea).

73,

    ... Joe, W4TV

On 9/1/2010 1:21 AM, John Gaynard wrote:
> What has changed?   Because of work, I was off the air until I went down to
> Little Cayman (ZF2JG)  I tested out the K3 up here before I left but did not
> bother to hook up the Microham MKII in that testing.  Big mistake.  When I
> got down there, the K3 would not interface with the MKII at 38400 bps.
> When I got home I noticed a new setting of K3 (patched) and it appears to
> work at 4800bps but not above that level.  I guess something has changed.
>
>
>
>
>
> John
>
> K8WDN
>