[Elecraft] Case for XG2

[Dave Van Wallaghen]

Hey Joe,

I make a number of enclosures for Elecraft's line of mini-modules. They 
are made of clear polycarbonate which is about 250 times stronger than 
glass and they show off your hard work quite nicely.

I have never advertised them, but last spring I made up a line of 
enclosures to cover the test bench modules (i.e. XG2, NGen, CP1 etc.). 
At the request of a couple of hams, I made them the same size and height 
so that they may be stacked on each other to reduce the amount of 
footprint on the bench when not in use.

I externalized BNC connections and jacks where applicable and provided a 
sliding top for access to other controls on the various boards. The 
sliding top is held in the closed position with magnetic strip.

I made a few of these for a few hams who all reported they like them. I 
can send you some pics if you like. I'd price them out at $15.95 a piece 
with $8.50 S&H. I can certainly put 2-3 in the same shipping box if you 
desire enclosures for other test modules to save on the shipping.

Here is a link to my enclosure page for the other enclosures I make so 
you can get a feel for what they might look like:
http://w8fgu.home.comcast.net/~w8fgu/enclosures.html

Feel free to email me offline if you have any questions.

Take care & 73,
Dave W8FGU


On 10/29/2010 6:17 AM, Joe G wrote:
>
> Can any one suggest a case for the XG2
>
>   Joe
> W1JGS
>
> -----
> Joe
> W1JGS