[Elecraft] APF For K3

[GW0ETF]

Be aware though that the DSP 'switches off' the EQ once you get to 100Hz and
below bandwidth. If you raise your cw sidetone frequency band as you suggest
and then wind down the bandwidth your signal will take a dive as you cross
the 100Hz point.

73,

Stewart Rolfe, GW0ETF

 


N8XPQ wrote:
> 
> I have found that using the receive EQ for this works quite nicely. I
> raise the frequency matching that of my side-tone and attenuate all
> others. The K3 will automatically switch to this EQ setting when you
> enable the CW mode and switch to the SSB setting when that mode is
> enabled. 
> 
> Good luck,
> 
> Mike N8XPQ 
> 
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/APF-For-K3-tp5667924p5668627.html
Sent from the Elecraft mailing list archive at Nabble.com.