[Elecraft] [K2] KXV60 Transverter In and Out connectors - BNC v. RCA

[Ron D'Eau Claire]

I used RCA connectors.

Over the years I've used RCA connectors without issue up through 30 MHz,
which are the frequencies involved in transverter service with the K2. 

Sure, there might be a little 'impedance bump' - particularly up on the
higher frequencies - but it's inconsequential in this application. 

Ron AC7AC

-----Original Message-----

I am about to install the KXV60 in my K2 (10W) and need to make the
connector decision. My preference would be the BNC connectors, but would
like to know if there are any considerations beyond personal preference.

Thank you,
Gary

KJ7RT
Sun City, AZ
Fists #14460  NAQCC #3709