[Elecraft] PSK-31 Decoding

[Lyle Johnson]

> Two things to check Mark.
>
> 1.  Is CWT on?  It needs to be on and the threshold set so that you see the marker
> centered in the tuning area.
>
> 2.  If you have Decode and CWT on maybe you have the alternate DISP on (current,
> voltage, temp...etc).  Try tapping DISP to go back to the normal VFO B display.

You also need to sharpen the WIDTH so that you are only hearing *one* 
PSK signal, and it needs to be centered on the CWT -- a couple of taps 
of SPOT will usually do this once you have it in the CWT range.  On a 
busy band, I often use WIDTH of 50 Hz.

73,

Lyle KK7P