[Elecraft] K3 AGC dead spot

[Mike]

Don,

I have 1.3.10.15, and in fact had done a calibration using the XG2 with it. Still 
waiting to hear why Dale recommended factory defaults. He should be getting to the 
office soon.

I assume (yeah I know) when using the XG2, it doesn't matter which of the 3 freqs I 
use.....

73, Mike NF4L

On 10/21/2010 9:18 AM, Don Wilhelm wrote:
>  Mike,
>
> Recently a bug was found with the RF Gain Calibration routine in K3 Utility did not 
> properly save the new data.
> If you were not using the very latest K3 Utility, that would explain many 
> anomalies.  Moral - download the latest K3 Utility and try again.
>
> 73,
> Don W3FPR
>
> On 10/21/2010 8:53 AM, Mike wrote:
>> I understand that the knob labeled RF doesn't really control RF gain, but since
>> Elecraft labeled it that way, I think it's better to reference it that way.
>>
>> I have an XG2, and had done the RF gain calibration using it. Dale recommended doing
>> it using the factory defaults. I'm waiting to hear back from him why.
>>
>> It's a kit, just a tad over a year old, with all available mods.
>>
>> The mechanism by which the tables may get hosed is the same principle which makes
>> them work. HPFM. (HocusPocusFreakyMagic) :-D .
>>
>