[Elecraft] DXLab Commander K3 user-defined controls & sliders

[Jim McDonald]

I uploaded my DXLab Commander user-defined controls and sliders (just AF and
RF gain so far) for the K3 to the DXLab Yahoo Files folder:
http://groups.yahoo.com/group/dxlab/files/Command%20Sequences%20%26%20Slider
s/Elecraft/ .

Though the K3 has the capability of using front panel keys for macros, the
DXLab Commander rig control program sequences (macros) can be longer and
don't use the radio's buttons.

I am using those I uploaded though they can serve as examples that can be
adapted to other applications.  One simply switches VOX on and off instead
of using the press and hold key on the radio.  Another mutes the AF gain.

I have two more complicated ones that switch between a front-panel mic and a
rear-panel mic, changing the TX EQ, mic gain, compression, and VOX gain.  In
my files, the rear-panel mic is a Heil HC-4, and the two front panel mics
are my old Shure 444D and a Heil PR-781 set up for non-pileup use
(ragchewing but not ESSB).  The settings I'm using are for my voice, so
you'd need to adjust them for your preferences.

I used the help documentation at
http://www.dxlabsuite.com/commander/Help/CommandSequences.htm , 
the K3 Programmer's Reference Manual, and the K3 Utility Program help file
to understand how to set them up.  Since I'm posting this to two reflectors,
the DXLab Suite site is http://www.dxlabsuite.com/.

You can simply download the files into the Commander\Sequences or
Commander\Sliders folder and load them, editing them to customize them for
your use.  You have to check the box in the Commander Configuration General
panel to "Show user-defined controls panel."

Jim N7US