[Elecraft] K2: display quirk..

[Don Wilhelm]

  John,

Most K2s will do that on occasion.  It normally happens when the 
firmware is doing many tasks.
If it is frequent, then you may have a problem, but just occasionally, 
no problem.

73,
Don W3FPR

On 10/21/2010 5:25 AM, VK7JB wrote:
> Hello All,
>
> My base K2 is completed and KSB2, KNB2 and KDSP2 modules are installed and
> working well. I'm relieved. Thanks to Don for his reassurance along the way.
>
> I've noticed a quirk with the display of my K2 and can't find it mentioned
> in the archives.  While tuning with the VFO, the display will jump for an
> instant between either the power display or the keyer speed display.  It is
> a very transient switch between the two displays.  It occurs infrequently
> and I can't predict it.  Changing the position of the keyer speed and power
> pots, in case they are close to some critical voltage position, hasn't
> changed the glitch.  This makes no difference to the function of the K2, so
> I'm just ignoring it, but I'm wondering if its particular to my K2, or if
> others have noticed this.  Seems to me like it might be a processor issue.
>
> Now on with the KPA100...
>
> Thanks and 73
> John
> VK7JB