[Elecraft] Sometimes this radio drives me nuts

[Wayne Burdick]

The "SPL N/A" message has been in the firmware for a very long time.  
It's telling you that SPLIT is not applicable to the present cross- 
mode settings of VFO A and B. Cross-mode SPLIT is allowed in some  
cases, such as CW/SSB and SSB/CW.

You can check or change the VFO B mode using BSET.

Wayne

On Oct 13, 2010, at 6:22 PM, Rick Tavan N6XI wrote:

> What firmware version are you running, Wes? I'm on 4.14, which may  
> be a test
> version, and the response to Mode Up/Dn when in Split is "SPL N/A" and
> nothing at all happens. No idea of the release version on which that  
> came in
> to play.
>
> /Rick
>
> On 10/13/10, Wes Stewart <n7ws at yahoo.com> wrote:
>>
>>
>> I've since determined that while in "Split" and "Data" mode, by  
>> pressing
>> "Mode Up" --- by mistake in this case---  the radio attempts to  
>> change to CW
>> but can't because split doesn't allow it, but before figuring this  
>> out, it
>> inserted a 450 Hz offset, which is the beat note that I use on CW.