[Elecraft] [K3] How to program quick 100 or 200 KHz QSY

[Dick Dievendorff]

You might use a macro that sends an UPn; or DNn; command where "n" is

1 for 10 Hz
2 for 20 Hz
3 for 50 Hz
4 for 1000 Hz
5 for 2000 Hz
6 for 3000 Hz
7 for 5000 Hz
8 for 100 Hz
9 for 200 Hz

See the K3 Programmer's reference under the DN/DNB command.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Pete Smith
Sent: Tuesday, October 12, 2010 2:36 PM
To: Elecraft List
Subject: [Elecraft] [K3] How to program quick 100 or 200 KHz QSY

I've been digging in the archive but can't figure out how to program 
quick memory buttons to provide a quick 100 or 200 KHz up/down QSY.  
This the one and only thing I miss about my Mark 5.  I know about 
Fine/Coarse and spinning the knob, but would like to find a better way

-- 
73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html