[Elecraft] Band selection

[Dick Dievendorff]

Almost.  See "MEM 0-9" in the configuration section on page 57 of the D-7
version of the K3 Owner's manual. After you set these up, you can press M->V
and then one of the number keys to navigate to the last-used frequency on a
particular band.

You may find the K3 Frequency Memory Editor a convenient way to set up these
and other memories and save the settings into a file so you can restore them
if you accidentally erase a memory.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Weir
Sent: Tuesday, September 28, 2010 3:05 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Band selection


Ok folks here is what I would like to do with my K3....set it up so that
when I press the number one key I am on the 10 meter bands, press the 2 key
12 meter band and so on up to 80 meters. Is there a way to program this as
opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM
 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html