[Elecraft] K3 + THO Amp - Additional

[Joe Subich, W4TV]

The PR6 gets its power from the +12V jack.  It gets a control
signal (on/off by band) from the ACC jack (Digout 0 - I think).

73,

    ... Joe, W4TV


On 10/10/2010 7:33 PM, Ken Kopp wrote:
> Dave,
>
> If you happen to have the PR6 ... or other ... six meter
> preamp, be aware that it's power is supplied via the
> ACC jack, and a control cable for the THP amp will
> need to provide an additional wire for this.
>
> 73! Ken Kopp - K0PP
>         ElecraftCovers at rfwave.net
>