[Elecraft] k3 in Data mode+Signalink Usb how to check proper level

[Don Wilhelm]

  Giorgio,

Yes, the ALC meter works with the line in or the rear microphone jack.  
Adjust the levels to activate the first 4 bars with the 5th bar 
occasionally flickering.

There are some interface boxes that require a jumper to be changed to 
obtain the higher level output that is required by a line-in.  Check the 
documentation for your interface.

73,
Don W3FPR

On 10/9/2010 4:26 PM, ik1bxn wrote:
> Hi! For digi modes I put my k3 it into Data Mode and I use a Signalink Usb
> external interface rear connected. Everything' s working but I'd like
> suggestion to verify that I set properly Signalink interface output level
> and/or rear input k3 level control in way I have a correct and full
> modulation. Could anybody suggest me how to check it ? I'm thinking to ALC
> meter but I'm not sure it works when using rear input plug. Many thanks in
> advance, best 73 de Giorgio