[Elecraft] P3 for EME

[elecraft at g4fre.com]

My results were while using 00.36 P3 software

Dave

Date: Tue, 05 Oct 2010 21:45:59 -0700
From: Alan Bloom <n1al at cds1.net>
Subject: Re: [Elecraft] P3 for EME
To: "elecraft at g4fre.com" <elecraft at g4fre.com>
Cc: elecraft at mailman.qth.net
Message-ID: <1286340359.1669.144.camel at ulinux-desktop>
Content-Type: text/plain; charset="UTF-8"

Hi Dave,

The latest P3 firmware (00.36) fixed a bug that prevented the P3 from
properly indicating K3 frequencies above 200 MHz.

Alan N1AL


On Tue, 2010-10-05 at 21:23 -0400, elecraft at g4fre.com wrote:
> I used the P3/K3 combo to keep an eye on the activity on the bands 1.3 thro
> 10GHz during the European tropo microwave contest last weekend. It was useful,
> however I had to disable the direct frequency readout on these bands as the P3
> "tune and click" knob could not cope with bands above 144MHz. Reported to
> Wayne
> Dave
> G4FRE