[Elecraft] Volume Level with NR

[k2qi.nyc at gmail.com]

This too has been my experience, although Lyle has done a good job with the recent updates. However, performance and volume levels in general are still sub par in my opinion. Compare the K3 with even an AF dsp solution like the Gap ANEM, and you'll see that a lot of work still remains to be done.

73 de James
K2QI
------Original Message------
From: Jim Harris
Sender: elecraft-bounces at mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Volume Level with NR
Sent: Oct 4, 2010 12:04


Hi,

I've noticed recently that when I press NR the volume level drops what could be called a considerable amount.  I normally use NR setting of F-1-1 or -2.  More than that tends to almost mute the receiver.  I find that the volume control needs to be increased about 70 degrees or so to give the same loudness as before the NR was pressed with the above settings.  I have to manually change the volume every time I engage or disengage the NR.  I realize that most likely there should be some decrease in loudness but this seems to be excessive.

Does anyone have any meaningful experience or recommendations they can pass along.

Thank you.


Take Pride in the USA!

73,  Jim, W0EM


 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Sent via BlackBerry from T-Mobile