[Elecraft] Re： Diversity Receive as Noise Canceling?

[Johnny Siu]

Hello Edward,

This will depend on how much 'brain power' is left in the DSP.   Apparently, 
currently, quite a work load of the DSP has been used to eliminate the internal 
birdies.

Having said that, thanks for the modular design of K3, a 'heart-transplant' of 
exchanging the DSP board with more powerful version may be feasible.

 cheers, 


Johnny VR2XMC 



----- 郵件原件 ----
寄件人﹕ Edward R. Cole <kl7uw at acsalaska.net>
收件人﹕ olaf.devik at mollefaret.no
副本(CC) Elecraft at mailman.qth.net
傳送日期﹕ 2010/11/30 (二) 3:44:10 PM
主題： Re: [Elecraft] Diversity Receive as Noise Canceling?

At 10:06 PM 11/29/2010, you wrote:
>Noted your comment on noise reduction by phase nulling. Have you 
>looked on info on pages by pa0sim, see www.pa0sim.nl, he has done 
>more or less what I think you are considering. Ie connecting the 
>output from 2 phase locked receivers fed with separate antennas and 
>do the amplitude/phase nulling at AF level.
>
>Some of the sound samples on his website are impressive in terms of 
>noise reduction.
>
>I would love to see an application which could do this, would be 
>nice to check out if phase nulling works at a site before trying an 
>MFJ unit or similar. I really would like to see this done in the K3 
>as all the hardware is there to do such phasenulling in software, 
>could eg use the VFO B knob for phase control and the volume knobs 
>for amplitude control. Only requirement is to feed the 2 RXs with 
>separate antennas, ie an alternative use of diversity capability.
>
>I was not able to respond on the reflector. Would be nice if you 
>could keep the group updated if you get more info on this.
>
>73 de Olaf LA3RK

Olaf,

Thanks for writing.  I somehow lost your e-mail and wanted to look at 
the pa0sim webpage.  I merely suggested the idea.  I really have no 
prospect for doing this.  I thought maybe Elecraft might be 
interested in the idea; provide firmware to do it.

A modification on doing diversity reception was what I had in 
mind.  Use a small "sniffer" antenna on the aux Rx input to sample 
noise and null it from the main receiver in sw.  I think it would be 
easiest to accomplish in digital before conversion to audio.  All the 
DSP routines are done there:  NB, NR, AGC, APF, DSP bandwidth.  Phase 
shift and amplitude adjustments would be possible in digital, so 
assigning VFO-B would be relatively simple for phase and use the 
sub-Rx volume for amplitude adjustment.

I guess it's now up to Elecraft if they want to explore this.



73, Ed - KL7UW, WD2XSH/45
======================================