[Elecraft] K3: Configuration Storage Porblem
Guy Olinger K2AV
olinger at bellsouth.net
Mon Nov 29 16:03:46 EST 2010
I'd call that one into Elecraft support. Let them walk you through some
analysis. 73, Guy.
On Mon, Nov 29, 2010 at 3:41 PM, <w1gd at aol.com> wrote:
>
>
>
> K3 s/n 1428
>
> Two recent problems that may be related:
>
> 1. After the K3 has been powered off for a long time (e.g., over night)
> and I power it on, I can’t get more than 12 watts out. I checked the
> configuration menu for KPA and it’s normal. NOTE: I first noticed this on
> Friday (11/26) about 30 minutes before the start of CQWW Contest when I went
> t double check the presets on my linear. After a panicked search of the
> manual and the reflector list, I changed from Beta Version 4.22 to 4.14 and
> it didn’t help. As a last resort, I reinstalled the configuration I had
> saved in the Utility and it fixed things (5 whole minutes before the contest
> start!) The K3 was on for the next 48 hours with no issues. I turned it
> off after the contest and today, when I turned it on again, the same
> problem. Having the radio off for a short time (e.g., about 30 minutes has
> no problem)
>
> 2. After the K3 has been powered off for a long time (e.g., over night) and
> I turn it on, I get ERR messages (e.g., ERR BP1). If I keep tapping the
> band switch, I get a series of other ERR messages (e.g., ERR IO3, etc.) and
> eventually the VFOB frequncy gets displayed. I thought this was related to
> the random power on error messages Wayne referred to in one of the software
> fixes, but I got this with Version 4.22 as well.
>
> It seems to me that my K3 MCU is not retaining some of the configuration
> data. When I run through the configuration menu, I don’t see any errors. I
> did a quick search of the manual and didn’t find any help.
>
> Any help here?
>
> Gerry, W1GD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list