[Elecraft] K3 Configuration Question

[Edward R. Cole]

I use the K3 Freq. Memory Editor sw to program up to 99 memories with 
specific freq./modes for quick switching.  This is loaded via the 
RS232 port into the K3.  Then all I do to change bands/modes is to 
press M>V and rotate VFO-A to select memories 00-99.  I have them 
grouped for favorite freq. in each band and mode: e.g.  51=14.020/CW, 
52=14.070/DATA, 53=14.205/USB, 54=14.292/USB, 55=14.345/USB, and 
56=15.000/AM ...etc.  There are enough memories for me to add 
favorite 6m, 2m, and 1296 freq./mode memories.  The last two bands 
require that the KV3A is set up using the XVn configuration settings 
(but that is another subject).


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-800*w, 432-100w, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep dubususa at hotmail.com
======================================
*temp not in service