[Elecraft] K3 and Microham MKII

[Joe Subich, W4TV]

> What are the correct setting to get the K3 to work with the Microham
> MKII. I see K3 and K3 (patched) with no info at all about what K3
> patched even means.

Either will work.  The (patched) version clears the CAT queue more
quickly if the K3 stops responding (user turns it off but leaves a
logging program polling) and will recover more quickly.

Make sure the K3, MK II and logging software are all set for the same
data rate.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.
        http://www.microHAM-USA.com
        http://groups.yahoo.com/group/microHAM



On 11/26/2010 8:35 PM, John Gaynard wrote:
> What are the correct setting to get the K3 to work with the Microham MKII.
> I see K3 and K3 (patched) with no info at all about what K3 patched even
> means.  It used to work with just K3.  Work has been hectic and finally I
> get a chance to work CQ WW CW and the MKII will not connect with the K3
>
>
>
> John
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--