[Elecraft] K2 KPA100 tests

[VE3WDM]

Here is what I did I removed all the coax and coax switches that were in line
with the K2 and dummy load. I also used a better dummy load I did have an
old one from MFJ replaced it with one I got from Ridge. When all that was
done there was no problem on any of the bands with Hi Cur warnings. So
thanks very much for your help with this issue Don. 
The other thing about the chirp it is still there and I know you asked me
about the KPA100 and blue toroids. There are 2 of them in the unit and I
checked the date when I purchased the KPA100 from Elecraft and it was
10/16/2009. You had also wanted to know if the KDSP2 was installed and it
is. Does any of this help with the chirp noise?
Mike
VE3WDM
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-tests-tp5760475p5775520.html
Sent from the [K2] mailing list archive at Nabble.com.