[Elecraft] K3 LoCut/HiCut

[Nate Bargmann]

* On 2010 24 Nov 20:34 -0600, Gary wrote:
> Thanks Nate. The audible effects are as I expected them to be when adjusting
> low or high cut but the visual representations on both the K3 and the P3
> were not and had me a bit confused. I'll continue to experiment.

The display only has a relatively few segments compared to the steps and
runs out of display segments rapidly.  The dark segments represent the
relative passband bandwidth based on the mode.  If the passband is
centered then the segments will be centered over the arrows below the
line the passband segments "sit" on.  If higher then the segments will
be to the right and if lower then to the left.

Mostly it's just a nice visual aid showing the relative passband width
and shift.  The real information is in the VFO B display when the
settings are changed.

HTH,

73, de Nate N0NB >>

-- 

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://n0nb.us/index.html