[Elecraft] KRC2 Config Software Problem

[Dave New, N8SBE]

Yep.  I have the same problem, or at least had it, since I haven't tried
it for quite a while.  I've tried all sorts of things including a
(gasp!) real serial port, and nothing worked.

The most peculiar thing is that I have no problem re-flashing the KRC2,
but I can't change the configuration with the configurator program.  I
need to do this so I can drive a 3 of 8 encoded remote antenna switch.

I even took hi-res shots of both sides of the completed PCB, and emailed
them to Elecraft support (at their request), but aside from being told
they were very good shots, I never heard back.

I'm finally about to complete my antenna system, and it would be nice to
be able to use the KRC2 for what I bought and built it for.

73,

-- Dave, N8SBE

> -------- Original Message --------
> Subject: [Elecraft] KRC2 Config Software Problem
> From: "K3RWN" <rwnewbould at comcast.net>
> Date: Tue, November 23, 2010 8:02 pm
> To: <Elecraft at mailman.qth.net>
>
>
> Has anyone had an issue with trying to get the PC to send program data to
> the KRC2 Config Utility?
>
>
>
> I have tried everything, USB adapters (several), real com ports, different
> PCs and Laptops.
>
>
>
> I am stuck
>
>
>
> Rich
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html