[Elecraft] New APF what happened?

Hector Padron ad4c2008 at yahoo.com
Wed Nov 17 08:49:06 EST 2010


Well,well,well,lets put a couple of cents here.Last night at midnight when the XYL went to sleep and it was very quite I finally installed the Beta version 4.22 on my K3 and after few minutes when it ended up,move the dial to the lower end of 40M band and there was a station from Senegal,my dipole antenna is not too high,just 20 feet over the ground and his signal was only 559 and afer narrowing the DSP to 500Hz still heard him weak and little noisy BUT when I pressed for more than a second the XFIL/DUAL PB key to enable the APF WOW !! I almost fell off my chair,that Senegal station was so loud and clean as a local station,signal was still a S5 but the received audio was so clear and  loud that look like a 599 station.I am very impressed with this new filter and to be honest the last Icom radio I owned was the 756ProIII and that guy could never do this so well.
Again my claps go to Elecraft for having improved further more our K3's.
Thanks
 
Hector
AD4C
K3 # 2192

"If you see a driver handling a cell phone on her/his hands while driving,do please stay away from that vehicle,its a moving bomb.Your life is at danger.Keep yourself and your family alive"

--- On Wed, 11/17/10, Pete Smith <n4zr at contesting.com> wrote:


From: Pete Smith <n4zr at contesting.com>
Subject: Re: [Elecraft] K3:New APF what happened?
To: elecraft at mailman.qth.net
Date: Wednesday, November 17, 2010, 12:41 PM


John, did you check in the CONFIG menu to make sure APF is turned on?

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000


On 11/17/2010 3:16 AM, juergen wrote:
> Hi
>
> I was so impressed by the original K3 APF firmware. Why is it so lack luster in the current beta?
>
> I have read all the posts that there is no difference,  my ears tell me different?
>
> When I used the APF in its original release on 160m and 80 meters it just blew me  away to mars and back. Now I might as well not have it on! The  signals dont "pop"out of the noise like they use too.
>
> I might have to have my ears cleaned and checked for wax or something.
> I am mystified especially when Lyle says that there is no difference in the firmware.
>
>
> The K3's APF in the current beta behaves much like the one in my Icom radios and they are very ineffective in the Icom radios.
>
> I have shifted back to the old beta 4 times  and the results are better for the old APF and it wins hands down. I will keep the old beta just for contests, its just too good  not to use.
>
> 73
> John
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



      


More information about the Elecraft mailing list