[Elecraft] K3 - Installation times for options

[Bill Conkling]

I have installed several upgrades to my original K3/10.  I have found that
20 to 30 minutes will cover most items.  Filters are on the low side, the
sub-rec or 2meter xverter (Internal) might be a little more.  The longest I
have had was the KAT3 auto tuner.  It took about 15 minutes to install, but
another 30 minutes to locate the internal 'star' washer that slipped out of
my fingers, and I was determined not to apply power 'till I had found it!
It was logged in the corner, in front of the shield between a standup
capacitor and the side panel in the gap behind the front panel.  Would not
shake out.  Finally retrieved it with a 'dental' pick.  I'm getting pretty
good at removing the top panel by now.

I hope you have as much fun and enjoyment with yours as I have with mine.
The assembly was fun, but using it is even better.

Good luck!

...bc  nr4c


-----Original Message-----
From: Rick Stealey [mailto:rstealey at hotmail.com] 
Sent: Saturday, November 13, 2010 2:23 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 - Installation times for options


I wonder if I could get a few ideas regarding the times to install a couple
options.
The 100 watt PA, and the KXV3 IF interface and multiple antenna input kit.

How long should I budget?

Rick  K2XT
 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html