[Elecraft] K3 P3 and SteppIR controller

[Pete F5VNB]

Using the Y cable in the serial feed from the P3 to the K3 works here.
Perhaps something has changed in your setup?
I now prefer using LP-Bridge to feed the SteppIR because it sends the tx 
frequency to the SteppIR when working split.

73, Pete F5VNB

On 12/11/2010 23:37, zumbruns at comcast.net wrote:
> Good afternoon to the group.  How do I configure the K3, P3 and SteppIR controller so that the K3 P3 will cause the SteppIR to change bands.  Before the P3 I had no trouble controlling the SteepIR with the K3.  73, Steve
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html