[Elecraft] Firmware 4.17 anomaly

[Guy Olinger K2AV]

4.17 is in recall status, with some number of issues reported by beta
testers.  There did seem to be a bit of tip-of-the-iceberg to it all.
4.18 or whatever surfaces is not out yet.

73, Guy.

On Fri, Nov 12, 2010 at 1:52 PM, Forrest Hudspeth <wa3fae at gmail.com> wrote:
> I had contacted support at Elecraft a short while back about losing my right
> channel of audio.  I was certain that I had only placed stereo 1/8 inch
> plugs into my back panel speaker jack, but it did sound like I might have
> somehow damaged an audio IC.  As my headphone jack on the back and front
> panel still had 2 channels of audio, getting the audio board fixed was a low
> priority.
>
> About a week that, I discovered that my Config:Spkrs setting was set to 1.
> After changing it back to 2, I had my missing right channel.  Okay.  That's
> fine, I could have set it mistakenly.
>
> Only... today I was using the rig and heard a relay click and the right
> audio channel dropped out.  I check the Config setting and sure enough, it
> was set back to 1.  This had happened a couple of times since the original
> discovery where it was mysteriously set to 1 but this is the first time I
> could blame it on the rig spontaneously changing it.
>
> I have placed a few macros in my P3 with the P3 Utility but otherwise do not
> use the macros in the K3 Utility and very seldom use the PF1 and PF2
> buttons, which have macros in them.
>
> Anybody else experience this or have a fix?
>
> Forrest WA3FAE K3 #977, Firmware 4.17, P3 #439, Firmware 00.41
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>