[Elecraft] K3 Feature request

[Eric Swartz - WA6HHQ, Elecraft]

The only change in f/w was to the S-Meter calibration on 144 Mhz. there 
was no change in sensitivity and the gain of the K144XV is fixed in h/w.

We are revisiting the cal level for the S-Meter on 144 MHz.

73, Eric
www.elecraft.com
---

On 11/10/2010 5:36 AM, w8zn at comcast.net wrote:
> Now that the K144XV is available and a lot of us are planning to use it to drive microwave transverters, it would be really nice if there was some way to easily adjust IF gain. I know there was a gain change after 3.97 so it appears this is available in the firmware. Is there a way that along with RF freq, IF freq and offset offered in the XV config that there could be a gain per band setting added? When you add a transverters, most times the transverter has a fair amount of conversion gain and having the S-meter sit at S5 with noise doesn't help dynamic range. For eme'ers, we typically have lots of gain in preamps that drives the S-meter up. Using the ATT works but it's either in or out, nothing in between.
>
> Just a thought.
>
> Terry Price - W8ZN  ex K8ISK
> FM18dv - 1.8MHz thru 47GHz
> K8GP - The Grid Pirates - FM19bb
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html