[Elecraft] K3 CW decoder

[Amateur Radio Operator N5GE]

On Tue, 9 Nov 2010 18:37:58 -0200, "Adriano" <adriano.perazio at uol.com.br> wrote:

Adriano,

You may be trying to decode someone who is sending with their right foot
(sending bad CW ).  When using decoders the characters must be formed correctly.
That is, the Dahs, Dits and spacing must be in the correct proportion or very
close to it for the decoder to work.

There is no replacement for the brain when decoding CW.

Tom
Radio Amateur N5GE
QCWA Member 35102

>I didn´t get the point yet.
>The manual says to try change the THR from Auto to 5.
>The speed is right but even strong sigs it´s hard to find the point and decode it.
>Also the manual says to move the WIDTH from.50 to 100-200hz but....
>Any trick ???
>
>Tnx a lot
>PY2ADR / ZY2C
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html