[Elecraft] [K3] KDVR3

[nr4c at widomaker.com]

I think I posed this question before. Does the DVR audio recording get  
passed thru the TX EQ currently set? Or does the TX EQ get set  
temporarily to "0 0 0 0 0 0 0)? I think this would be the best IMHO. I  
have made recordings with two different mics, and then they were  
played back, they didn't sound the same as immediately after recorded.  
I assumed that the first recording was recorded with one TX EQ. Then I  
reset the EQ and made second recording. Now when I play the first  
recording, it sounds different, as if it were being re-EQd by the new  
TX EQ settings. I'd like a real answer to this.

...bc


ps; Hi Roy!

NR4C



Quoting Jim Cox <jcox123 at bellsouth.net>:

> Yes, this has been a problem here since I got my K3 about a year ago.
> Others have noticed it when their audio is played back to them making
> playback on the air almost useless for quality reports.
> I have reported this problem but nothing has been done to solve it.
>
> Hopefully the problem will be fixed in the future.
>
> Jim K4JAF
>
>
> ----- Original Message -----
> From: "Roy Morris" <w4wfb at carolina.rr.com>
> To: <elecraft at mailman.qth.net>
> Sent: Tuesday, November 09, 2010 6:38 AM
> Subject: [Elecraft] [K3] KDVR3
>
>
>> Re-transmitting (on-the-air) an SSB signal that has been recorded
>> on-the-air results in a very "pinched" audio through the DVR monitor and a
>> slightly pinched audio reported by those receiving the play-back. The
>> re-transmission is no longer the faithful reproduction it used to be.
>> However, the play-back in my K3 without re-transmitting is a faithful
>> reproduction. This occurs in both of my K3s that have the KDVR3 option.
>> It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback
>> problem. It is also there when using a 50 ohm dummy load. Does anyone
>> else have this problem? Roy Morris W4WFB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>